Forklifts are generally used in the loading of objects on the NSW pallet shelving. This is because some of the pallet rack constructions are quite high, measuring several feet high. The structure of the pallet racks can be roll formed where the columns are supported by the beams. They can also be structural in case the beams are bolted. There are several kinds of standard pallet rack configurations such as the selective racks, the flow racks, the drive in/drive through racks and the pushback racks.
The selective racks are the most commonly used in pallet shelving NSW applications. These types of the pallets are easily accessible from the aisle of the structures. The beams in the system will act as the support for the pallets. It is applied in several types of storage including the narrow aisle racking as well as in the standard and deep reach systems of racking.
The drive-in and drive-through racking systems
These types of racking systems are capable of very high density storage. These kinds of systems are generally built from steel and they allow space for the forklift to move on the bays of the structures or in the lane of stacks. They feature a single entry and exit way but they provide entry access on both sides of the bay. Because items are loaded in last in first out process in the drive-in process, they are ideal for those terms that have low turnover or ones which are non-perishable. For the drive through process, the items in the warehouse are loaded through a first-in and first-out process. These occur in the floor-ceiling structures.
Pushback racking systems
These kinds of systems are perfect for the bulk storage of items due to the fact that you will be able to store objects which are several pallets deep. When you add a new pallet to the system, it will push the next pallet next on the rails where this will rest. On unloading, the pallets are pushed to the front of the shelving structure. The loading of these structures is via a LIFO system.
The Flow Racks
The flow racks are perfect for the high-density storage of items. The loads will be stored on the higher end points and unloaded on the lower end points of the system. It is based on the FIFO system of loading. When products are loaded, the rotation of the system is automated as a result of the flow of racks.
When you are planning to buy pallet shelving NSW systems, it is advisable to take time to learn about the loading systems and configurations in order to determine which one will be most suitable for your needs. Find out more here: http://www.skyrac.com.au/pallet-shelving-sydney-nsw/